Download Print this page

Garner HD-2X IRONCLAD Assembly Manual

Erasure verification system

Download this manual

HD-2X IRONCLAD Erasure Verification System ASSEMBLY

• Completely read through the instructions before

beginning assembly process.

• Do not open equipment chassis. Assembly only

requires access to exterior of units.

Using a torx wrench, remove three bolts from the upper right and

lower right side of the HD-2X face plate. Save bolts for Step 2.

3A. Attach stylus by slipping split ring from stylus tether onto one of the control head bolts before attaching

to mounting bracket and control head. 3B. Using the 3/16 allen wrench and 2 control head bolts, attach

touch screen and stylus to mounting bracket using center holes.

GarnerProducts.com

Tel: 916-784-0200

Fax: 916-784-1425

10620 Industrial Avenue Suite 100 Roseville, CA 95678

Package includes:

• Imaging device and

HDMI cable

• Touch Screen Control

Head

• 2 control head bolts

• Mounting bracket

• Scanner, Stand

• Converter Cable

• DB9 cable

• A/C power cable

• 3/16 allen wrench

• T-20 torx wrench

• Stylus

Using a torx wrench and three bolts from Step 1, attach the imaging

device to the HD-2X.

See cable connecting instructions on page 2.

1-800-624-1903

4075-918B Manual, Install, IC-HD2X

2018-3-26

1/2

Page 1 HD-2X IRONCLAD Erasure Verification System ASSEMBLY • Completely read through the instructions before • Scanner, Stand Package includes: • Converter Cable • Imaging device and beginning assembly process. • DB9 cable HDMI cable • Do not open equipment chassis. Assembly only •...
Page 2 IRONCLAD Ports The IRONCLAD contains the following interfaces: 1. Ethernet 2. USB (4) 3. HDMI 4. Power 5. Power 6. DB9 connector Optional PD-5 connection 7. Mini USB 8. Power 1. 2. 3. Steps to Connect A. Connect IRONCLAD port 2 to the HD-2X port 6 using con-...