Clarion APX200.2 Operating & Installation Manual page 8

Mixed-Mode Satellite and Subwoofer System
FREQ (hz)
80
100
125
150
200
NOTE: Chart values based on 4 ohm speakers.
Figure 5 - The amplifier can be configured for a mixed-mode operation. The
table provides component values to create a 6dB per octave crossover at
specified frequencies. Use components that have a + 5% tolerance and
capacitors rated at 100V. NOTE: Choose the same frequency for both LP and
HP crossovers. Do not overlap frequencies, as this may damage the amplifier.
8
(Set INPUT SELECT Switch to STEREO)
L (mH) C (uF)
8.0 497
6.4 398
5.1 318
4.2 265
3.2 199
Set X-Over Mode to OFF.