Connecting 4 Hdmi Cables (The Devices Supporting 8K Output) - Sharp AQUOS LC-70UX500H User Manual

Preparation
Connecting external devices
When connecting external devices that support 8K output (commercially available)
Use 4 HDMI cables to connect HDMI 4(A~D) ( devices support 8K output).
• Use 4 HDMI cables to connect this TV and 8K output devices (output resolution7680×4320 ) .
• When connecting 8K output devices,please use commercially available high-speed transmission (2160p/60Hz
supporting) HDMI cables to connect them correctly and make sure 8K output display on the suitable position.
• The reflecting position of HDMI input terminal is in the diagram below.
• When HDMI 4(A~D) receive the synchronous input, TV will show 8K effect.
• HDMI 4-A sound is used as the default setting .
• If you want to change the default setting,select HDMI 4 input source,and then press
" HDMI 4 Audio in select " → select audio input terminal which you want.
• Before connecting , please read the operation manual of external devices.
HDMI 4-A
HDMI 4-C
IMPORTANT
◇ ◇
• Use the same type of HDMI cables,if not,it may not operate normally.
• HDMI 4(A~D) terminals are 3840×2160 (24Hz, 30Hz, 60Hz) inputing. Another input will confuse the display.
Connecting 4 HDMI cables (devices supporting 8K output)
• Need to use the commercially available high-speed transmission (support 2160p/60Hz) HDMI cables.
HDMI 4-B
HDMI 4-D
(MEUN) button →
17