Hints And Tips - Electrolux EW6T4272I User Manual

Table of Contents

Advertisement

9.13 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:
• The time area shows
display shows the lid locked
• The drum still turns at regular
intervals to prevent creases in the
laundry.
• The lid stays locked.
• You must drain the water to open the
lid:
1. Press the Start/Pause button:
2. When the programme is completed
and the lid locked indicator
off, you can open the lid.
3. Press the On/Off button for a few
seconds to deactivate the appliance.
9.14 Stand-by option
The Stand-by function automatically
deactivates the appliance to reduce the
energy consumption when:

10. HINTS AND TIPS

WARNING!
Refer to Safety chapters.
10.1 The laundry load
• Divide the laundry into: white,
coloured, synthetics, delicates and
wool.
• Follow the washing instructions on the
laundry care labels.
• Do not wash white and coloured items
together.
• Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first couple of times.
• Turn multilayered fabrics, wool and
items with printed illustrations inside
out.
• Pre-treat tough stains.
• Wash heavy soil stains with a special
detergent.
• You do not use the appliance for 5
minutes .
Press the button On/Off to activate
the appliance again.
• 5 minutes after the end of the washing
programme
Press the On/Off button to activate
the appliance again.
and the
The display shows the end of the last
programme.
.
Turn the programme dial to set a new
cycle.
If the dial is rotated to the "Reset"
position
turns off in 30 seconds.
goes
• Be careful with curtains. Remove the
hooks and put the curtains in a
washing bag or pillowcase.
• Do not wash laundry without hems or
with cuts. Use a washing bag to wash
small and/or delicate items (e.g.
underwired bras, belts, tights,
shoelaces, ribbons, etc. ).
• A very small load can cause balance
problems with the spin phase leading
to excessive vibration. If this occurs:
a. interrupt the programme and
b. manually redistribute the load so
c. press the Start/Pause button.
• Button up pillowcases, close zippers,
hooks and poppers. Tie up belts,
cords, shoelaces, ribbons and any
other loose elements.
, the appliance automatically
If you set a programme or an
option that ends with water
in the drum, the Stand-by
function doesn't deactivate
the appliance to remind you
to drain the water.
open the door (refer to "Daily
Use" chapter);
that the items are spaced evenly
around the tub;
The spin phase continues.
ENGLISH
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents