Information On The Display Panel - Siemens WM12K222IL Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Information on the display panel

Display
YES
NO
v flashes
E:17
E:18
E:23
w
¼ flashes
Other displays
Cause/remedial action
The washing machine door is unlocked. It is possible to add laundry.
Temperature too high. Wait until the temperature drops.
Water level too high. Not possible to add laundry. Close the washing machine
door immediately, if necessary. Select Start/Reload to continue the pro-
gramme.
Laundry may become trapped. Open and close the washing machine door
again and select Start/Reload.
If necessary, push the washing machine door closed or remove the laundry and
push it closed again.
If necessary, switch the appliance off and on again; set the programme and
make your individual settings; start the programme.
Turn the water tap on fully,
supply hose kinked or trapped,
water pressure too low. Clean the filter. ~ Page 25
Detergent solution pump blocked. Clean the detergent solution pump.
~ Page 24
Drain hose/waste pipe blocked. Clean the drain hose on the siphon.
~ Page 25
Water in the base tub, appliance leaking. Turn off the tap. Call the after-sales ser-
vice.
Childproof lock activated; deactivate it. ~ Page 20
Too much foam detected, a rinse cycle has been switched on
Switch off the appliance, wait for five seconds and switch it back on again. If the
indicator appears again, call the after-sales service ~ Page 29
Faults and what to do about them.
en
27

Advertisement

Table of Contents
loading

Table of Contents