Classic Accessories Stellex Instructions

Instructions: Stellex
CAUTION
Do not use this product while transporting your boat.
It could come off in traffic and cause injury to others.
CAUTION
If your boat is new, use of this product is not
recommended within the first four weeks of ownership
of the boat. Some compounds used in new boats can
release gases that will cause the dyes in seat covers
to transfer to the boat, potentially staining the boat or
its components. Seat covers can be used safely after
this introductory period.

Installation for double seat back support:

1.
3.

Usage

To cover your boat
seat, simply unzip
the seat cover bag
and pull the cover up
and over the seat.

Care and Cleaning

If your cover
becomes dirty it can
be cleaned with luke-
warm water and a soft brush. DO NOT USE SOAP
OR DETERgENT as it may damage the protective
coatings on your cover. Line dry.
™
Always Ready Boat Seat Cover
2.
Your Stellex ™ Always Ready Boat Seat Cover is
designed to store down and out of the way under
your boat seat.
How it attaches to your boat seat depends on
what type of seat you have. The most common
form of boat seat is a single seat post with either a
single or double seat back support.

Installation for single seat back support:

1.
3.

Storage

A handy storage bag is provided for your cover.
To avoid mildew be sure your cover is completely
dry before you store it in the storage bag for a long
period.
2.
CLASSIC ACCESSORIES, INC.
KENT, WA USA 98032 © 2 0 1 3
c l a s s i c a c c e s s o r i e s . c o m
20-222-010501-00 13cB51_15903