<stop bit>
RS-232 stop bit setting
<parity>
RS-232 parity type
<time interval> /
This value sets the time interval /
<timeout>
timeout value for a port timer.
-For Trigger usage, time interval is the
frequency that the port will return its
current sensed voltage state.
-For RS-232 usage, timeout is the
amount of time in milliseconds that Rx
data is stored in the buffer
<TCP port>
TCP port number
<port level>
Trigger port level
1:
1 stop bit.
1.5:
1.5 stop bits.
2:
2 stop bits.
PAR_NONE:
No parity.
PAR_ODD:
Odd parity.
PAR_EVEN:
Even parity.
PAR_MARK:
Parity force to 1(Mark).
PAR_SPACE:
Parity force to 0(Space).
PAR_MULTIDROP:
Multidrop mode.
From 0 to 65535 milliseconds
From 0 to 65535
LEVEL_HIGH:
I/O port trigger input pin is
high state.
LEVEL_LOW:
I/O port trigger input pin is low
state.
35
Need help?
Do you have a question about the KD-IP922ENC and is the answer not in the manual?