Advertisement
Configuring the Channels for a Multiplex
1.
Once the scan is complete, click
The Multiplex List (as shown in the following example) displays information on the currently tuned multiplex,
as well as the other available multiplexes for this Torpedo.
2.
To view and configure the channels for a multiplex, click the
3.
On the Multiplex Information page (shown following), you can enable up to 15 individual channels (from a
single RF multiplex) for the Torpedo to stream.
4.
For each channel, you will need to provide network information to reach the IP target desired, including IP
Address, Port, TTL (Time to Live), DSCP (Differentiated Services Code Point), and optionally, LCN (Logical
Channel Number).
HVS-ID-QS-TORP-220, Issue 02
S
from the main menu and then click
YSTEM
Torpedo Quick Start Guide
Configuring the Channels for a Multiplex
M
L
ULTIPLEX
IST
Frequency
link for the multiplex.
.
Page 6 of 7
Advertisement
