Page 1
TO AVOID INJURY: USE ONLY DARTS DESIGNED FOR THIS PRODUCT. DO NOT MODIFY DARTS OR DART BLASTER. OWNER’S MANUAL X6 C BE SAFE, ALWAYS WEAR A HELMET AND OTHER PROTEC BATTERIES BLASTER SCOOTER TIVE GEAR. NOT INCLUDED 3 WHEEL TILT&TURN SCOOTER MODEL NO.: M5...
Page 2
ATTENTION: 1. Before you allow your child to use Nerf Blaster Scooter, ensure that the steering rod is fully engaged and that all the screws are tight. Also ensure that the wheels have been correctly secured and that they show no signs of wear.
PARTS LIST Adult assembly required. Warning! Not to be used by children under 36 months due to small parts while unassembled. Choking Hazard. Tips: Please verify that all pieces are included prior to beginning assembly.
Page 4
ASSEMBLY Step 1: Step 2: Press the button and insert the stem Remove M6 bolt from blaster, slide the into the base. blaster into cradle, and then tighten blaster to cradle the M6 bolt completely. Step 3: Step 4: X6 C BATTERIES NOT INCLUDED Insert the handlebar grips into the...
Page 5
HOW TO ADJUST THE HEIGHT The handlebar can be locked into place at 2 di erent heights. Please make the following adjustment to reach required height. Open the Quick Release Lock, press the locking button, adjust the handlebar to a suitable height, and then close the Quick Release Lock.
Page 6
FIRING Press and hold either button trigger till you here motors engage and dart blasts - then release. If you keep trigger button pressed – darts will blast in rapid re mode very quickly. LOADING AMMO Load DARTS into the QUICK RELOAD CLIPS.
NOTE: Do not store blaster ready to re. • Be sure to unload DARTS from blaster before putting it away. Remove batteries if storing Blaster Scooter for an extended period of time IMPORTANT: BATTERY INFORMATION [Caution Logo] CAUTION: 1. TO AVOID BATTERY LEAKAGE a. Always follow the instructions carefully.
Need help?
Do you have a question about the BLASTER SCOOTER and is the answer not in the manual?
Questions and answers