Subscribe to Our Youtube Channel
Related Manuals for Forever Redwood CUSTUM THE BREEZY SMALL PAVILION
Summary of Contents for Forever Redwood CUSTUM THE BREEZY SMALL PAVILION
- Page 1 866.332.2403 (TOLL FREE) (707) 640.29.05 (Option 4) Direct Line for the Design Department; 7am – 7pm Pacific Time, Monday-Saturday ASSEMBLY INSTRUCTIONS FOR THE CUSTUM THE BREEZY SMALL PAVILION...
- Page 2 NOTE: Assembly is best done by two people. To assemble your product, you need a Hammer, a Ratch or a wrench and if required a Drill. Required Tools (Are not included in your hardware packing). PROCESS TO INSTALL THE HARDWARE PROVIDED. To install the bolts.
- Page 3 To install the lag bolts. Place the washers in their lag bolts. After that, insert the lag bolts into the holes and carefully tighten it using a ratchet with the necessary socket. Use the washers only for the Wood Pieces. To install the deck screws.
- Page 4 P| 3 CUSTOM THE BREEZY SMALL PAVILION www.ForeverRedwood.com...
- Page 5 P| 4 CUSTOM THE BREEZY SMALL PAVILION www.ForeverRedwood.com...
- Page 6 P| 5 CUSTOM THE BREEZY SMALL PAVILION www.ForeverRedwood.com...
- Page 7 P| 6 CUSTOM THE BREEZY SMALL PAVILION www.ForeverRedwood.com...
- Page 8 NOTE: In order to know where the post needs to be placed, check the numbers on them. If the post is not marked, then place the single Supports on the ground to locate the markings for each post position and clearly set your bearings. (“Don´t attach yet, only place them on the ground to begin with”).
- Page 9 Step 3: Put up the supports with in-between blocking (3), into the post notches as shown and attach to the posts with the single support bolts. Check the marked on each support with in-between blocking and place as drawings shown. ISP-1 ISP-4 Step 4: Attach the single supports to the supports with in-between blocking, use 3/8´´...
- Page 10 Roof Trusses Step 5: Attach the (4) to the posts with 3/8´´ x 7 1/2´´ bolts (B). Check the marked on each roof trusses and place as drawings shown. Note: put silicone in the roof trusses joins. 3/8´´ X 7 1/2´´ Bolts GR-2 GR-4 GR-1...
- Page 11 Step 7: Attach the central Roof Trusses (4) to the metal plaques with 5/16´´ x 3´´ Lag Bolt (C). Check the marked on each roof trusses and place as drawings shown. GR-5 GR-6 5/16´´ x 3´´ Lag Bolt Step 8: Attach the main knee braces (5) to the supports with 3/8´´ x 7 1/2´´ Bolts (B) and to the posts with 3/8´´ x 9 1/2´´ bolts (D).
- Page 12 Step 9: Attach the secondary knee braces (6) to the Roof Trusses with 3/8´´ x 7 1/2´´ Bolts (B) and to the posts with 3/8´´ x 9 1/2´´ bolts (D). Check the marked on each secondary knee braces and place as drawings shown. 3/8´´...
- Page 13 Roof Trusses Step 11: Attach the roof boards to the with 3´´ deck screws (G). 3´´ Deck Screws Step 12: Finally, attach the boots (9) to each post with 3´´ deck screws (G). 3´´ Deck Screws P| 12 CUSTOM THE BREEZY SMALL PAVILION www.ForeverRedwood.com...
- Page 14 This completes the Pavilion Assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't hesitate to call us (866 332 2403) or email us. We are here to support you. P| 13 CUSTOM THE BREEZY SMALL PAVILION www.ForeverRedwood.com...
Need help?
Do you have a question about the CUSTUM THE BREEZY SMALL PAVILION and is the answer not in the manual?
Questions and answers