Table of Contents
Advertisement
Quick Links
RTS 1S12 LARGE CURVED BLEACHER ASSEMBLY INSTRUCTIONS
CONGRATULATIONS
Congratulations in choosing a unique product to enhance your slot car track
diorama. This can truly be described as a product born from a love for slot cars.
Buying this product have made you a member of a very special family, yes you are
not dealing with a faceless business, but rather a family of slot car fanatics.
We have put hours of skill and more importantly love into this product and it is
wonderful to share our love for slot cars with you. May you enjoy the build and have
years of joy having it as part of your trackside diorama.
This product is an imaginary structure, but many likewise structures can be found at
racetracks around the world. This structure is one in a series of curved bleachers
and can be combined with some of the others.
WARRANTY
This product is covered by a comprehensive money-back warranty to ensure your
absolute satisfaction with your purchase.
WHO ARE WE?
This product is brought to you by racetrackscenics.com. If you have not done so
already, please visit our website today. You are also most welcome to visit the
Facebook pages
"Race Track Scenics Slot Car Scenery" and "Johan Malan" to
keep up to date with the latest developments and the launching of exciting new
products that may be in the pipeline.
You can contact Kevin Sharpe on
Email: racetrackscenics@gmail.com
Text in the USA 586 549 2879
WhatsApp 1-586-549-2879
for any assistance that you might require. Your feedback and a photo or two of your
trackside addition will really be appreciated. We love to share in your joy!
WHAT IS IN THE KIT?
In this kit you will find all the laser cut pieced needed to assemble this product. The
pieces are still intact in the sheets as they were cut to ensure that all the parts are
there. Some of the loose bits inside pieces may have been removed, but they are not
part of the finished product. In the section "FAMILIARIZE YOURSELF" below, you
will find diagram(s) that identify and explain each piece (component) that you are
about to assemble. In the section "PREPARING THE CUT PIECES" below, you will
learn how to proceed to prepare the pieces for assembly.
ASSEMBLY INSTRUCTIONS
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for RTS 1S12
Summary of Contents for RTS 1S12
- Page 1 ASSEMBLY INSTRUCTIONS RTS 1S12 LARGE CURVED BLEACHER ASSEMBLY INSTRUCTIONS CONGRATULATIONS Congratulations in choosing a unique product to enhance your slot car track diorama. This can truly be described as a product born from a love for slot cars. Buying this product have made you a member of a very special family, yes you are not dealing with a faceless business, but rather a family of slot car fanatics.
- Page 2 WHAT YOU WILL NEED We have specifically designed this product so that it is easy to assemble with only a few basic tools. You will need the following: a screwdriver a sharp hobby knife some glue a few toothpicks a few earbuds can be handy a paintbrush or sponge roller and paint or a rattle can or two with spray paint.
- Page 3 FAMILIARIZE YOURSELF Have a look at the photo of the finished product. Now have a look at the next diagram where all the laser cut parts are showed and numbered from A to J and try to identify which is which and where they fit in.
- Page 4 You will notice that this structure consists of three legs (H 1-3) which carries five benches (C 1 - G 1). The very rear bench has a backrest (B 1). The rear of the structure is rounded off with a trellis (A 1) which restricts access to the underside of the bleacher.
- Page 5 LET’S GET STARTED WITH THE ASSEMBLY The assembly of this structure is really easy and should not take too long. Start by gluing the six feet (J 1-6) to the three legs (H 1-3). The stubs of the legs will fit into the slots of the feet.
Need help?
Do you have a question about the 1S12 and is the answer not in the manual?
Questions and answers