RTS 5640-000100 Series User Instructions

5640-000100-xx-xx
adjustable garden table
1. Unpack the garden table from its box.
2c. Table divider set, consisting of a
long centre divider and two short width
dividers.
5. Insert the threaded end of the upper leg
section into the receiving pockets of the
table.
RTS Companies Inc. | 1027 Industrial Place, P.O. Box 179, St. Clements, Ontario N0B 2M0 |
RTS Companies US, Inc. |
RTS GARDEN TABLE ADJUSTABLE
Read these instructions and general information to properly and safely
assemble a garden table with adjustable legs.
2. Contents should include: sealed bag of
hardware.
3. Flip the table over onto a solid surface.
6. Twist the leg clockwise to secure it in
place; stop when the thread has bottomed
out.
2900 Industrial Park Drive, Austinburg, Ohio 44010-0183 |
USER INSTRUCTIONS
User Instructions
2b. A set of four (4) legs.
4. Remove the legs from its packaging,
each leg consist of a larger upper
sections, and a smaller lower section
inserted inside of the larger section.
7. Be aware of the threaded end of the
lower leg as shown. This end should be
pointing up when inserting it into the
lower leg.
1-800-663-2803
1-888-641-3077
May 2011
Revision 00
PAGE 1/2