Wired Control; Wireless Control - GoPro Volta User Manual

Using Volta to Control Your GoPro

WIRED CONTROL

Volta's integrated camera buttons gives you easy one-hand control of your GoPro.
1. Press the Battery (Battery icon) button to wake Volta.
2. Press Voltas' Mode
3. Press Volta's Mode button repeatedly to cycle to the mode that you want.
4. Press Volta's Shutter
5. To stop capturing video or time lapse, press Volta's Shutter button again.

WIRELESS CONTROL

Use Bluetooth to turn Volta into a wireless remote. Simply detach your GoPro from
Volta and follow these setup instructions:
1. On your camera, complete these steps:
a. From the rear screen, swipe down to access the Dashboard.
b. Swipe left, and then tap Connections > Connect Device > Volta.
2. Press the Bluetooth (Bluetooth icon) button on Volta. Your camera will
automatically begin pairing.
After pairing, Volta and your camera will automatically connect when they are
both on.
Heads Up: Volta can only connect to one camera at a time.
PRO TIP: After detaching your GoPro, plug Volta's USB cable into the charging
port to keep it out of the way.
WARNING: Volta is not weather resistant when used as a
wireless remote or any time the USB-C cable is disconnected
from your camera.
button to turn you GoPro on.
button to start capturing.