Advertisement
Item
Function
no.
Manual adjustment
Adjustment
value display
Detail Adjustment
(1)DTL LEVEL
(2)LEVEL DEP /
BOOST FREQ
(3)CRISP /
DTL SOURCE
Switch
Select adjustment items with the manual
control section switches.
section shows the adjustment item and
value.
Use the rotary encoder to adjust the items
for optimum values.
When the
adjustment value is displayed from -100 to
+100.
Display example
Display
TOTL: Total detail level adjustment
H: H detail level adjustment
V: V detail level adjustment
Press again the switch for the following
display.
LDPP: Dark component noise due to detail
FREQ: Adjusts detail boost frequency (13 M
Press Again the switch for the following
display.
H-CR: Noise component reduction due to H.
V-CR: Noise component reduction due to V.
SRC:
16
Operating procedure
switch is on, the
reduce.
to 19 M).
detail.
detail.
Detail
signal
source
selection.
The display
(R,RG,RGB)
Advertisement
