Advertisement
Item
Function
no.
Scene file
memory
Shutter control
Switch
Scene file adjustment values can be stored
in memory by the following procedure.
(1) Press the
(2) The
(3) Press the scene file (
(4) The selected scene file LED flashes and
the
seconds. This completes storing memory.
The adjustment data of paint gain and
black can not be stored in memory,
To stop memory operation,
while the
press again the
Press
on/off and select the shutter speed and
mode.
Insequence,1/100(*1),1/250,1/500,1/1000,
1/2000 seconds, variable, AES,CCFR
(*2)
(*3)
(*1) 1/60 ,when 1080i/50 CCD is used.
(*2) CCFR: cc frame mode
(*3) AES:auto electric shutter mode
For variable mode, after selecting the
manual control section
Master gain can be selected in 3 dB
steps.
(-3dB~24dB)
Selected master gain position is indicated
by the LED on left of this switch.
14
Operating procedure
switch.
LED begins blinking.
) for storing data in the memory.
LED lights for about 3
LED is blinking,
switch
to toggle the shutter display
(*1)
Variable mode
1/59 to 1/1983 (1080i/60)
1/50 to 1/2008 (1080i/50)
–
or
switch,
Advertisement
