Table of Contents
Advertisement
Use the control panel: (located in the electric fire box right side)
5a.A) Power:
Push button to turn ON or turn OFF.
It is invalid to child lock state.
The POWER button supplies power to all the features of the electric insert. This button must
be ON for any of the features to work properly.
When the fireplace is first turned on, the Flame is Amber, the Spot Light is blue, the
Carbon Light is Amber, the heater default OFF.
When OFF all current settings will be restored then restored at the next power ON ( except
Timer). Unplug the unit will reset the setting to factory default.
5a.B) Flame:
This button controls the brightness/color of flame.
It is invalid to OFF or child lock state.
When the first time push simulated flame effect that the flame brightness is on highest setting
and the flame with Amber, the digital display screen will be shown A.
Display
Flame color
Brightness
5 levels
Press and hold the flame button and enter the flame brightness adjustment after hearing
the beep. There are 5 levels of flame brightness. The display flashes for the current flame.
After switching the flame mode, the flame brightness returns to the brightest, and the
flame brightness is not saved after the device is in standby.
Carbon Light:
5a.C)
Press to Activate the back Carbon light function,the system will set the Amber spot light, the
digital display screen will be shown 03.
It is invalid to OFF or child lock state.
5a. Manual Control Panel
A
V
Amber
Violet
5 levels
M
B
Cyan
Blue
5 levels
5 levels
G
P
Green
Polar
5 levels
N/A
OFF
Off
N/A
- 15 -
Advertisement
Table of Contents
