NOTE: Make sure the glass is properly installed according to the direction and steps below,
and fully attached to the firebox so that the control panel can work properly.
4.A10) Fix the glass front by screws (CC) and complete the installation.
Screws (CC) reference model configuration.
Hardware Used
CC: Bolt 30"/SUM-30-056
CC: Bolt 36"/SUM-36-058
CC: Bolt 42"/SUM-42-060
CC: Bolt 50"/SUM-50-062
CC: Bolt 60"/SUM-60-064
CC: Bolt 72"/SUM-72-066
4.A11)Finish the installation.
4B. Wall-mounted installation
4B.1) To mount the item to the wall,Refer to the
fixed size of the product and mark the
fixed position on the wall.
Using a 1/4-inch Electric drill bit (not
included), drill a pilot hole at each of
the marked corners .
2PCS
2PCS
2PCS
4
PCS
4
PCS
4
PCS
- 10 -