Installation Instructions - Uniflame UFPDS1101BLK Manual

INSTALLATION INSTRUCTIONS

DETERMINING IF THE RISER BAR
IS NEEDED
• You may or may not need to install the
riser bar, depending on the height of
yourfireplace.
• To determine if you need the riser bar,
place the glass door unit in front of
yourfireplacetoseeifitfitsyour
fireplaceopening.
• If the top of the glass door unit does not
reachthetopofyourfireplaceopening,
you can install the Riser Bar to the bottom
of the unit to add extra height to the unit.
1. RISER BAR INSTALLATION
To attach the riser bar:
• L aytheunitfacedownonasoftflatsurface.
• Attach the Riser Bar (M) to the bottom
of the unit by inserting the Long Machine
Screws (G) through the holes in the Riser
Bar and the holes on the bottom of the
unit, as shown.
• Secure the Long Machine Screws using
the Hex Nuts (H), as shown.
Hardware Used
G
Long Machine Screws (x2)
H
Hex Nuts (x2)
1
M
5
O
M
Riser Bar
G
H