Safety Information - Uniflame UFPDS1101BLK Manual

SAFETY INFORMATION

Beforeinstallingyourfireplacedoors,besuretoreadallsafetyandassemblyinformationtoensuretheproper
operation of the unit. If you have any questions regarding the proper use of this product, be sure to contact our
customer service department, whose contact information is found in our warranty.
WARNINGS
DO NOT closetheglassdoorsuntilthefireplacehascompletelycooled.
•
DO NOT closetheglassdoorswhileafireisburninginthefireplace.Eventhoughthedoorsare
•
made of tempered glass, the glass can still shatter if exposed to excessive heat.
DO NOTleavethescreendoorsopenwhilethefireisburning.Besuretoleavethescreendoors
•
closedwhileafireisburninginthefireplace.Thiswillpreventsparksfromescapingfromthefireplace.
DO NOT allow any cold liquid or substance to come in contact with the glass doors while they are
•
hot. This could cause the glass to shatter.
DO NOT buildafirethatistoolargeorplacethefirewoodgratetooclosetothescreendoorsto
•
avoid discoloration of the frame.
DO adjustthedamperfoundatthebottomfrontofthescreendoorstoallowforproperairflowinto
•
yourfire.
WARNING: This product can expose you to chemicals, including lead and lead components which
are known to the State of California to cause cancer, birth defects, and other reproductive harm.
Wash your hands after handling this product. For more information go to www.P65Warnings.ca.gov.
FIREPLACE PRECAUTIONS
• B eforeoperatinganewfireplace,besuretoneutralizethefireplacebyapplyingadilutedsolution
of ammonia, followed by a warm then cold rinse.
•Neverstorecombustibleorvolatilesubstancesinsidethefireplace.
•Keepallcombustibleandvolatilesubstancesawayfromthefrontofthefireplace.
•Donotuseanycombustibleorvolatilesubstancestohelpstartafire.
•Openthechimneydamperbeforestartingafire.
•Keepchildrenandpetsawayfromthefireplacewhileinuse.
• D onottouchanypartoftheglassdoorunitwithyourbarehandswhileafireisburning.
Always use an insulated glove to open and close the doors and damper.
•Neveruseyourfireplaceasanincinerator.
• Always allow ashes to fully burn out and cool before disposing.
PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list. If any part is missing or
damaged, do not attempt to assemble the product.
Package Removal: Carefully remove the glass door unit and all other
pieces from the box, placing the glass door unit face down on a soft
flatsurface.
Tools Required for Assembly (not included): Flathead Screwdriver,
Phillips Head Screwdriver, Work Gloves, Measuring Tape, Scissors
4
INSTALLATION VIDEO
Scan QR code below
for assembly video.