Hh2 Meter - Delta-T Devices SM200 Quick Start Manual

3

HH2 Meter

Connect the SM200 to the HH2 meter.
Esc
Press to turn the meter on, and if necessary
press again until the HH2 displays the start-up screen.
Set the meter to read from an SM200:
►
Set
Press
►
Press Set again and scroll down to select
SM200.
►
Press Set to confirm this choice.
Make sure the HH2 is correctly configured for your soil type:
►
At the start-up screen, press Set and scroll down to the
►
Press Set again and scroll down to the appropriate soil type (use
for sand, silt or clay soils or
soils)
►
Press Set to confirm this choice.
Choose the units you want for displaying readings.
►
At the start-up screen, press Set and scroll down to the
►
Press Set again and scroll down to select units.
►
Press Set to confirm this choice.
Read
Press
Store
Press
Remove the SM200 from the soil and move to a new location...
If you have saved data, connect your HH2 to a PC and run
HH2Read to retrieve the readings.
© 2005 Delta-T Devices Ltd
and scroll down to the
Organic
to take a reading.
to save or Esc to discard the reading.
Device
option.
Device:
v SM200
for peaty
Soil Type:
v Mineral
SM200
20.3%vol
Soil Type
option.
Mineral
Display
option.
Store
?
Page 4