Listening To The Radio - JVC MX-DK15UN Instructions Manual

To drop the volume in a moment
To restore the volume, press again, or
adjust the volume level.

Listening to the Radio

To select the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and other
countries use 10 kHz spacing.
1
Select "AM," then turn off (standby) the System.
2
Select the appropriate AM space interval for your
area.
(While holding...)
To select the band (FM/AM)
To tune in to a station
While FM or AM is selected...
1 sec.
Increases the frequencies.
Decreases the frequencies.
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency search stops.
• When you repeatedly press the button, the frequency
changes step by step.
To stop searching manually, press either button.
9
Remote
ONLY
INFO
Main Unit
ONLY
AM
FM
(10 kHz interval)
(9 kHz interval)
FM AM
Remote
ONLY
If the FM station has poor reception
The MONO indicator lights on the display.
Reception will improve though stereo
effect is lost—monaural reception mode.
To restore the stereo effect, press the
button again (the MONO indicator goes
off).
Remote
To preset stations
ONLY
You can preset 30 FM and 15 AM stations.
1
Tune in to a station you want to preset.
2
Select a preset number.
3
Store the station.
To tune in to a preset station
1
Select the band (FM or AM).
2
Select the preset number for the preset station.
Examples:
To select number 5, press 5.
To select number 10, press 10.
To select number 15, press h10,
1, then 5.
To select number 30, press h10,
3, then 0.
• You can also use 1 or ¡ buttons.
FM AM