Advertisement
B3
B4
B5x2
B2x2
B1
A1x6
A2x8
A4x6
A5x4
A7x1
2
A3x14
A6x4
Identify and verify all of the included hardware
To begin, place the glass base (B1) on a flat surface
with the shiny side facing upwards. It is best if this
is located on a table, where the mounting holes are
able to hang just over the side.
Locate the following parts:
•Glass Base (B1)
•Two rear pedestals (B2)
•Metal top plate (B3)
•Rear bracket plate (B4)
•Two vertical bars (B5)
•Six clear vinyl self adhesive feet
•Eight plastic washers (A2)
•14 metal washers (A3)
•Six hex head screws (A4)
•Four philips head screws (A5)
•Four wing nuts (A6)
•Allen wrench (A7)
3
Advertisement
