Dryer Alarm Table - SPX Hankison GCU Series Instruction Manual

DRYER ALARM TABLE

Alarm Conditions
Alarm Text Alarm Trigger
HIGH PRESSURE High pressure switch open
LOW PRESSURE Low pressure switch open
COMPRESSOR Motor protection #1 switch open
HEATER Heater switch open
DRAIN 1 Drain #1 switch open
DRAIN 2 Drain #2 switch open
SERVICE Dryer service interval > 0
DRYER AND Dryer service timer > Dryer service interval
EVAPORATOR Evaporator temperature sensor out of range
TEMP SENSOR
20
Delay Monitored
1 Second Always
3 Minutes Always
1 Second Primary
Compressor On
1 Second Standby
1 Second Dryer On
1 Second Dryer On
None Always
1 Second Always
Exit Condition Alarm Action
Manually reset the Halt compressors
high pressure switch. De-energize alarm
Alarm reset button relay #1
pressed
Alarm reset button Halt compressors
pressed De-energize alarm
relay #1
Alarm reset button Halt compressors
pressed De-energize alarm
relay #1
Alarm reset button De-energize alarm
pressed relay #2
Alarm reset button De-energize alarm
pressed relay #2
Alarm reset button De-energize alarm
pressed relay #2
Alarm reset button De-energize alarm
pressed relay #2
Alarm reset button Halt compressors
pressed De-energize alarm
relay #1