3.0 MAINTENANCE
3.1 Daily
A. Check separator to make sure the automatic drain is
discharging.
3.2 Weekly
A. Blow down the separator weekly by pushing the test
button on the control panel.
3.3 Monthly
A. Clean off the accumulated dust and dirt on the
condenser coil monthly.
3.4 Annually
A. Replace the filter element in the moisture separator
annually. Also replace the cold coalescing filter
element annually where applicable.
B. Replace the drain service unit annually.
C. Maintenance kits are available to facilitate annual
maintenance.
14
Models 0.5 & 0.75
Models 1.0 – 3.5
Head
Bowl O-Ring
Bowl
Element
Float Drain
Drain Line
Connection
Head
Extrusion O-Ring
(*Models 600-750 Only)
Extrusion
(*Models 600-750 Only)
Bowl O-Ring
Element
Bowl
Drain Connection