Installing (Jlip Player Software) - JVC GV-DS1DU Instructions Manual

INSTALLING (JLIP Player Software)

WINDOWS 95
Refer to the Windows 95 manual or your
computer's manual for details on basic
Windows 95 operating procedures.
Installation Procedure
*To start the setup program...
1
Launch Windows 95
•Close any other applications that are
running.
2
Insert the "VIDEO MOVIE PLAYER" CD-
ROM into the CD-ROM drive.
3
Choose "Run" from the "Start" on the
taskbar.
4
If the "VIDEO MOVIE PLAYER" CD-ROM
is in Drive D, type "D:\VMPE\SETUP" in
the box to the right of "Open". If the disk
is in Drive E, type "E:\VMPE\SETUP".
•Click "OK".
•Once the setup program is running,
simply follow the instructions displayed
on-screen.
•When setup is complete, the "MOVIE
PLAYER" icon appears on the screen.
•"MOVIE PLAYER Setup was completed
successfully." appears.
5
Click "OK" to complete installation.
WINDOWS 3.1
Refer to the Windows 3.1 manual of or your
computer manual for details on basic
Windows 3.1 operating procedures.
Installation Procedure
*To start the setup program...
1
Launch Windows 3.1
•Close any other applications that are
running.
2
Insert the "VIDEO MOVIE PLAYER" CD-
ROM into the CD-ROM drive.
3
Choose "Run" from "File" in the "Program
Manager".
4
If the "VIDEO MOVIE PLAYER" CD-ROM
is in Drive D, type "D:\VMPE\SETUP" in
the box to the right of "Open". If the disk
is in Drive E, type "E:\VMPE\SETUP".
•Click "OK".
•Once the setup program is running,
simply follow the instructions displayed
on-screen.
•When setup is complete, the "MOVIE
PLAYER" icon appears on the screen.
•"MOVIE PLAYER Setup was completed
successfully." appears.
5
Click "OK" to complete installation.
45