Download Print this page

Fisher-Price Y6967 Instruction Sheet page 2

Advertisement

Battery
Replacement
For best results, we recommend replacing
the batteries that came with this toy with
four, new C (LR14) alkaline batteries.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver and remove it. Remove
the exhausted batteries and
dispose properly.
• Insert four, new C (LR14)
alkaline batteries.
• Replace the battery compartment
door and tighten the screws. Do not
over-tighten.
• If the toy begins to operate erratically
you may need to reset the electronics.
Slide the power/volume switch on the
back of the toy off and then back on.
• When lights and sounds become
faint or stop, it's time for an adult to
change the batteries.
• Protect the environment
by not disposing of this
product with household
waste (2002/96/EC).
Check your local
authority for recycling
advice and facilities.
Battery Safety
Information
1,5V x 4
C (LR14)
In exceptional circumstances, batteries
may leak fluids that can cause
a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the
product. Dispose of batteries safely.
Do not dispose of this product in
a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be
charged under adult supervision.

Advertisement

loading