Table of Contents
Advertisement
Positioning and connecting
en
Transportation
e.g. when moving home
Preparatory work:
Turn off the water tap.
1.
Reduce the water pressure in the
2.
supply hose.
Maintenance – filter in the water
supply ~ Page 20
Drain the remaining detergent
3.
solution.
Maintenance – detergent solution
pump blocked ~ Page 19
Disconnect the washing machine
4.
from the mains.
Remove the hoses.
5.
32
Before initial use:
Notes
The transport locks must be
■
removed. ~ Page 27
To prevent unused detergent from
■
flowing straight into the drain during
the next wash: Pour
approximately 1 litre of water into
compartment II and select and start
the Drain [ programme.
Installing the transport locks:
Remove the covers and keep them
1.
in a safe place.
Use a screwdriver if necessary.
Insert all four sleeves.
2.
Clip the mains cable securely in the
holders. Insert and tighten the
screws.
Advertisement
Table of Contents
