Adjusting The High Pass Filter - Clarion CX609 Owner's Manual

Basic Operations
3-1. Each time press the [w] or [z] button to
select the setting, the setting changes in
the following order:
"THROUGH" ↔ "60" ↔ "90" ↔ "120"
∗ The factory default setting is
● Adjusting the subwoofer output
volume
You can adjust the volume output from the unit's
subwoofer output terminal.
This adjustment can be performed only when
the "REAR/S-W" is set to "S-WOOFER".
2-1. Select "S-W VOL".
3-1. Press the [w] or [z] button to increases
or decreases the subwoofer volume.
∗ The factory default setting is
(Adjustment range: +6 to –6)
● Adjusting the high pass filter
2-1. Select "HPF".
3-1. Each time you press the [w] or [z] button
to select the setting.
The setting changes in the following order:
"THROUGH" ↔ "60" ↔ "90" ↔ "120"
∗ The factory default setting is "THROUGH"
(through).
10
CX609
Setting the BBE MP
(Sound Enhancement and
Restoration for compressed audio
files)
"THROUGH
".
BBE MP (Minimized Polynomial Non-Linear
Saturation) Process improves digitally
compressed sound, such as MP3, by restoring
and enhancing the harmonics lost through
compression. BBE MP works by regenerating
harmonics from the source material, effectively
recovering warmth, detail and nuance.
∗ This fuction is effective for the audio files in the
1. Press the [
"0
".
2. Press the [x] or [v] button to select
3. Press the [w] or [z] button to select "ON"
4. When you select "ON", press the [
Notes:
• Manufactured under license from BBE Sound,
• Licensed by BBE Sound, Inc. under one or more
• During SOUND adjustment mode, if no operation
CD/MP3/WMA/AAC or USB/iPod mode, but it is
ineffective for the video in the USB/iPod mode.
] button to switch to the sound
adjustment selection display.
"BBE MP".
or "OFF".
∗ The factory default setting is "OFF".
button, then press the [w] or [z] button to
select as following order.
LOW ↔ MID ↔ HIGH
Inc.
of the following US patents: 5510752, 5736897.
BBE and BBE symbol are registered trademarks
of BBE Sound, Inc.
is performed for more than 10 seconds, this
mode can be cancelled and return to previous
mode.
]