Even though this manual provides general installation and operation instructions for your new Clarion WH200 Dual Channel Infrared Headphones, it does not show the exact installation methods for your particular vehicle.
Additional Headphones The Clarion WH200 allows users to take full advantage of the benefits of infrared audio transmission and its ability to oper- ate multiple headphones from one single transmitter. There is no need for Y-adapters, complex installation, or concerns over electrical overload.
ESCRIPTION ONTROLS AND Figure 1. The WH200 Transmitter descriptions. OWNER’S MANUAL/INSTALLATION GUIDE Infrared Transmitter NDICATORS IR Array window Point Infrared LED array window toward users. Mounting hole locations (covers removed) Use M4x12 sheet metal screws to attach IR Transmitter. (see Mounting Description on page 7).
DUAL CHANNEL INFRARED HEADPHONES WH200 ESCRIPTION EADPHONE ONTROLS Figure 2. The WH200 IR Remote Headphone controls and indi- cators. Infrared Headphones POWER Switch Main power switch turns headphone power off to prevent accidental micro switch activation during storage. POWER Indicator When illuminated the headphones are fully functional.
2. Turn the Headphone volume nearly off before turing on the power switch. 3. Turn the Headphone power switch to the ON position. 4. Place the headphones on your head and the power indica- tor will illuminate. 5. Adjust the Headphone volume to a comfortable listening level.
ARE NOT USER-SERVICEABLE. DOING SO WILL VOID THE WARRANTY. • Do not drop or excessively jar the WH200 headphones. • Do not use liquid cleaners on any surfaces. Only use a soft (cotton or other non-static) cloth to wipe off finger- prints.
• If a fuse needs replacement, use the same value as the original. Do not substitute another rating. OWNER’S MANUAL/INSTALLATION GUIDE OUNTING ESCRIPTION Blind Nut Opening for Cables Figure 4. The WH200’s input connectors and wiring. Blind Nut...
ROUBLESHOOTING Symptom Cause Solution System does Fuse is blown. Replace external fuse not work. with the same value. Headphone Power wires not Check Battery and indicator illu- connected. Ground wiring at tran- minated but no mitter. sound. No power indi- Batteries not Insert (2) Alkaline AAA cator on head-...
Need help?
Do you have a question about the WH200 and is the answer not in the manual?
Questions and answers