Installation of mobile audio and video components requires expe- rience with a variety of mechanical and electrical procedures. Even though this manual provides general installation and opera- tion instructions for your new Clarion WH105 RF Headphones, it does not show the exact installation methods for your particular vehicle.
Additional Headphones The Clarion WH105 allows users to take full advantage of the benefits of RF audio transmission and its ability to operate multiple headphones from one single transmitter.
3. Power LED Indicator When illuminated, the headphones are fully functional. The indicator will turn off when the headphones are removed or when the power switch is turned off. 4. Variable Tuning Contro Allows user to adjust the noise and frequency for the desired audio source signal.
3. Snap the battery cover back into place. Operation Description PLEASE READ CAREFULLY TO PREVENT DAMAGE TO THE HEADPHONES OR YOUR EARS. 1. Be sure batteries are properly installed in the Headphones. 2. Turn the Headphone volume nearly off before turning on the power switch.
Do not allow liquids or foreign objects to enter the WH105 RF Transmitter or Headphones. If any unit should become wet, turn off all power and let your authorzied Clarion Dealer clean or service the equipment. DO NOT ATTEMPT TO OPEN OR SERVICE THE RF TRANSMITTER OR HEADPHONES. THE INTERNAL PARTS ARE NOT USER-SERVICEABLE.
Test for noise and frequency by switching from Channel 1 or 2 for the desired audio source signal. NOTE: Remove headphones and lower the volume before switching between channels. The signal on one channel may be louder than the other, resulting in possible hearing damage.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in an automotive installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio commun- ications.