AC POWER ADAPTER
Thank you for purchasing the JVC AC Power
Adapter. This unit provides DC power for the JVC
Digital Still Camera from a household AC outlet. To
avoid problems and obtain the best results, please
read this instruction booklet carefully before use.
Connection to the mains supply in the United
DO NOT cut off the mains plug from this equip-
ment. If the plug fitted is not suitable for the power
points in your home or the cable is too short to
reach a power point, then obtain an appropriate
safety approved extension lead or consult your
BE SURE to replace the fuse only with an identical
approved type, as originally fitted, and to replace
the fuse cover.
If nonetheless the mains plug is cut off ensure to
remove the fuse and dispose of the plug immedi-
ately, to avoid a possible shock hazard by inadvert-
ent connection to the mains supply.
If this product is not supplied fitted with a mains
plug then follow the instructions given below:
DO NOT make any connection to the Larger
Terminal coded E or Green. The wires in the mains
lead are coloured in accordance with the following
Blue to N (Neutral) or Black
Brown to L (Live) or Red
If these colours do not correspond with the terminal
identifications of your plug, connect as follows:
Blue wire to terminal coded N (Neutral) or coloured
Brown wire to terminal coded L (Live) or coloured
If in doubt — consult a competent electrician.
When you are not using this unit for a long period of
time, it is recommended that you disconnect the
power cord from AC outlet.
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
This unit should be used with AC 110 – 240 V`
` ` ,
50/60 Hz only.
To prevent electric shocks and fire hazards, do
NOT use any other power source.
To prevent electric shock, do not open the
cabinet. No user serviceable parts inside. Refer
servicing to qualified service personnel.
The rating plate (Serial number plate) is on the
bottom of the unit.
As a AC Power Adapter, the AA-V33EK is used
exclusively with the JVC Digital Still Camera.
•If used near a radio, this unit may interfere with
•Prevent inflammables, water and metallic
objects from entering the unit.
•Do not disassemble or modify the unit.
•Do not apply shocks to the unit.
•Do not subject the unit to direct sunlight.
•Avoid using the unit in extremely hot or humid
•Avoid using the unit in places subject to
To avoid electric shock or damage to the unit,
first firmly insert the small end of the power cord
into the AC Power Adapter until it is no longer
wobbly, and then plug the larger end of the
power cord into an AC outlet.
You can connect the Digital Still Camera directly to an AC outlet using the this AC Power Adapter.
To AC OUTLET
AC POWER ADAPTER
CONNECT POWER CORD
Connect the Power Cord to the AC Power
• Make sure connections are secure.
CONNECT DC CORD
Connect the DC Cord to the DC Input Connec-
tor of the Digital Still Camera.
• Refer to the Digital Still Camera's instruction
manual when connecting.
Make sure the Power Cord is securely connected to
the AC Power Adapter.
When using the AC Power Adapter, use only the
supplied Power Cord. Use of any other cord may
result in shock or fire.
Connect the Power Cord to the AC Power Adapter
before connecting it to an AC outlet. If you plug it
into an outlet first, and the Adapter's terminals
come in contact with a metal surface or object,
short circuit or fire may result.
DURING USE . . .
Vibration noise can sometimes be heard coming from the inside of the AC Power Adapter. This is normal.
The AC Power Adapter processes electricity internally, and will become warm during use. This is normal.
Make sure to use the AC Power Adapter in well-ventilated areas only.
: AC 110`240V, 50/60Hz
: 16 W
: DC 6V, 1.3A
: 0 — 40°C
E. & O. E. Design and specifications subject to change without notice.
COPYRIGHT© 1998 VICTOR COMPANY OF JAPAN, LTD.
SUPPLY AC POWER
Connect the Power Cord to an AC outlet.
•After use, unplug the Power Cord from the AC
AC Power Adapter
Length : Approx. 2m
: 49 (W) x 30 (H) x 80 (D) mm
: Approx. 140g
(not including Power Cord)
TO DC INPUT
Printed in Japan