Table of Contents
Advertisement
50
EN
Audio settings [AUDIO]
OPTICAL OUT
Dolby D
2CH-PCM
2ND AUDIO REC
ON
OFF
This VCR can send the Dolby Digital bitstream or PCM Audio to external
devices.
When you play back a tape including the Dolby Digital bitstream, and if
you have a device equipped with Dolby Digital decoder, set this
function to "Dolby D".
If not, set this function to "2CH-PCM".
The digital audio is output only when you play back a tape recorded in
D-VHS format. The digital audio is not output when you play back a
tape recorded in S-VHS/VHS format.
AC120V
Amplifier equipped
with Dolby Digital
decoder
When this function is set to "ON";
If a SAP program is received, the SAP audio is recorded on both the
normal and Hi-Fi tracks. The main audio is not recorded.
If a non-SAP program is received, the main audio is recorded on both
the Hi-Fi and normal tracks.
When this function is set to "OFF", the SAP audio cannot be recorded.
OTHER USEFUL FUNCTIONS (cont.)
* The default setting is bold in the table below.
This VCR
Y
P
B
/C
B
P
R
/C
R
IN(L-1)
AUDIO
R
AUDIO
L
VIDEO
R
L
VIDEO
(MONO)
IN (L-2)
S VIDEO
S VIDEO
OUT
OUT
IN
1A
G
Note for connection:
Remove the connector cover
from the VCR and the
protection cap from the cable.
CABLE BOX
VHF/UHF
ANTENNA
IN
REMOTE PAUSE/
AV COMPULINK
TV
OUT
DVB-ASI
SYNC
IN
POL
–
+
Advertisement
Table of Contents
