Agilent Technologies 8753ES Datasheet page 27

Connectors
Dimensions
Weight
50-Ohm Accessory Kits
The 11853A 50-ohm type-N and the 11854A 50-ohm
BNC accessory kits provide the RF components
generally required when using either the 85046A,
85047A, or 11850C with the 8753ES Option 011
when measuring devices having 50-ohm type-N
or BNC connectors. These kits are supplied with
a storage case.
11853A 50-ohm type-N accessory kit
Includes
Type-N (f) short
Type-N (m) short
Type-N (m) to N (m) adapter
Type-N (f) to N (f) adapter
11854A 50-ohm BNC accessory kit
Includes
Type-N (m) to BNC female adapter 1250-1476
Type-N (m) to BNC male adapter
Type-N (f) to BNC male adapter
Type-N (f) to BNC female adapter 1250-1474
BNC (m) short
75-Ohm Accessory Kits
The 11855A 75-ohm type-N and the 11856A 75-ohm
BNC accessory kits provide the RF components
generally required when using either the 85046B
or the 11850D power splitter with the 8753ES
Option 011 when measuring devices having 75-ohm
type-N or BNC connectors. These kits are supplied
with a storage case.
11855A 75-ohm type-N accessory kit
Includes
Type-N (f) short
Type-N (m) short
Type-N (m) to N (m) adapter
Type-N (f) to N (f) adapter
Type-N (m) termination
11856A 75-ohm BNC accessory kit
Includes
Type-N (m) to BNC (f) adapter
Type-N (m) to BNC (m) adapter
Type-N (f) to BNC (m) adapter
Type-N (f) to BNC (f) adapter
BNC (m) short
BNC (m) termination
50-ohm type-N (f) to
75-ohm type-N (m)
standard Option 004,
50-ohm type-N (m) to
75-ohm type-N (f)
14-mm D x 70-mm L
(0.56 in x 2.75 in)
Net 0.1 kg (0.316 lb)
Part number
HP 11511A
HP 11512A
1250-1475
1250-1472
Part number
1250-1473
1250-1477
1250-0929
Part number
1250-1531
1250-1530
1250-1528
1250-1529
1250-1532
Part number
1250-1535
1250-1533
1250-1534
1250-1536
1250-0929
11652-60010
RF Limiter
Externally attaches to one or both ports of the
analyzer. Provides protection against potential
high-power transients from external devices.
Specifications
11930A 7-mm RF limiter
Frequency range
Nominal insertion loss
DC to 3 GHz
3 GHz to 6 GHz
Return loss
DC to 3 GHz
3 GHz to 6 GHz
Maximum input power
Maximum DC
11930B 50-ohm type-N RF limiter
Frequency range
Nominal insertion loss
5 MHz to 3 GHz
3 GHz to 6 GHz
Return loss
Maximum input power
85024A High-Frequency Probe
Two probes may be powered directly from the
front panel of the 8753ET/ES. Refer to technical
specifications, Agilent literature #5954-8393,
for more information.
Specifications
Input capacitance
(at 500 MHz)
Input resistance
Bandwidth
Gain (at 500 MHz)
Frequency response
300 kHz to 1 GHz
1 GHz to 3 GHz
Input voltage for
<1 dB compression
Supplement characteristics
Noise figure
<100 MHz
100 MHz to 3 GHz
Includes
Type-N (m) adapter
10:1 divider
Spare 12 mil probes
2.5-inch ground lead
Hook tip
Spanner tip
Probe tip nut driver
1. Return loss and insertion loss limited below 16 MHz by series capacitor.
2. Internal bias tees cannot be used with this limiter.
DC to 6 GHz
1.0 dB
1.5 dB
22 dB
20 dB
3 W
30 V, 350 mA
2
5 MHz to 6 GHz
1.0 dB1
1.5 dB
5 MHz to 3 GHz 21 dB 1
3 GHz to 6 GHz 17 dB
3W
<0.7 pF (nominal)
1 Megohm (nominal)
300 kHz to 3 GHz
0 dB ±1 dB
±1 dB
+2, -3 dB
0.3 V
<50 dB
<25 dB
Part/model number
11880A
11881A
85024-20012
01223-61302
10229
5060-0549
8710-1806
27