Agilent Technologies 8753ES Datasheet page 26

Accessories
Verification Kits
Measuring known devices other than the standards
used in calibration is an easy way to verify the
proper operation of an 8753ES measurement sys-
tem. Agilent offers verification kits which include
devices, with data, for verifying the error-corrected
measurements of an 8753ES and 50-ohm test sets.
85029B 7-mm verification kit
Contains a set of precision 7-mm devices, with
data traceable to NIST* for verifying the calibrated
performance of an 8753E measurement system.
The 85031B 7-mm calibration kit is required for
complete verification.
Test-Port Return Cables
Agilent offers high-quality RF cables to connect
the 8753ET/ES and test sets to devices under test.
These cables offer excellent RF shielding for high-
dynamic-range measurements.
11851B 50-ohm type-N RF cable kit
Recommended for use with the 11850C/D three-way
power splitters. Kit includes three phase-matched
610-mm (24-in.) cables and one 860-mm (34-in.) cable.
Return loss
Phase tracking
8120-5639 50-ohm type-N RF cable
A 50-ohm type-N test-port cable
(both connectors are type-N male).
Return loss
11857B 75-ohm type-N test-port return cables
A pair of 610-mm (24-in.) test-port return cables
for use with the 8753ES or 85046B 75-ohm
S-parameter test set.
Return loss
Phase tracking
11857D 7-mm test-port return cables
A pair of 610-mm (24-in.) test-port return cables
for use with the 8753ES with the 85046A and
85047A S-parameter test sets. These cables can
be used with connector types other than 7-mm
with the appropriate precision adapters.
Return loss
Phase tracking
11857F type-F test-port return cables
Type-F test-port cable set (75-ohm). Includes one
cable with type-N(male) to type-F(male) connectors
and one cable with type-N(male) to type-F(female)
connectors.
26
>24 dB to 3 GHz
±4° at 1.3 GHz
>30dB to 6 GHz
>24 dB to 2 GHz
±2° at 1.3 GHz
>24 dB to 3 GHz
>20 dB to 6 GHz
±2° at 1.3 GHz
11850C/D three-way power splitters
11850C
Impedance 50 ohms
Frequency range DC to 3 GHz
Tracking ±25 dB, ±3°
Equivalent source 30 dB at 1.3 GHz
match
(ratio or leveling) 20 dB at 3 GHz
Nominal 9.5 dB + 1 dB/GHz 7.8 dB
insertion loss
Input port match
DC to 1.3 GHz 20 dB
1.3 GHz to F max 10 dB
Maximum operating +20 dB
level
Damage level +30 dB
RF connectors
RF input 50-ohm type-N (f) 50-ohm type-N(f)
All others 50-ohm type-N (f) 75-ohm type-N(f)
Includes Three 11852B 50- to 75-ohm
minimum-loss pads
Recommended 11851B RF cable kit
accessories
11667A 50-ohm power splitter
Frequency range
Typical insertion loss
Equivalent source match
DC to 4 GHz
4 GHz to 8 GHz
8 GHz to 18 GHz
Tracking (between output arms)
DC to 4 GHz
4 GHz to 8 GHz
8 GHz to 18 GHz
Maximum operating level
Connectors
Option 001
RF input
Outputs
Option 002
RF input
Outputs
Dimensions
Recommended accessories
11852B 50-ohm to 75-ohm minimum loss pad
Frequency range
Nominal insertion loss
Return loss
300 kHz to 2 GHz
2 GHz to 3 GHz
Maximum input power
11850D
75 ohms
DC to 2 GHz
±2 dB, ±2.5°
30 dB at 1.3 GHz
20 dB at 2 GHz
20 dB
10 dB
+20 dB
+30 dB
DC to 18 GHz
6 dB
26 dB
21 dB
17 dB
±15 dB
±2 dB
±25 dB
±27 dBm
50-ohm type-N (f)
type-N (m)
type-N (f)
type-N (f) on RF
precision 7-mm
46 mmH x 52 mm W x19 mm D
(1.8 x 2.0 x 0.7 in)
11851B RF cable kit
DC to 3.0 GHz
5.7 dB
32 dB
27 dB
250 mW (+24 dBm)