Operating Your Appliance - Goldair GSD170 Operating Instructions Manual

TIMER
When the uni t is opera ting press the TIMER
button to set the length of ti me that you woul d
like the uni t to run for before turning off. Each
press of the TIMER button will adjus t the length
of ti me by 1 hour i ncrements from 1 – 24hours .
To turn off the Ti mer function, set the Timer
ba ck to "00" hours or simply turn the unit off.
When the unit is Off press the TIMER button to
set the length of ti me that you would like the
unit to remain off before turni ng on. Ea ch press
of the TIMER button will adjust the length of
time by 1 hour increments from 1 – 24hours. To
turn off the Timer function, set the Ti mer ba ck
to "00" hours or simpl y turn the uni t on
ma nually.
WATER TANK FULL
A beep si gnal will sound 15 times . The WATER
FULL indi ca tor light will illumina te on the control
panel . The compressor will s top automa ti call y,
a nd the unit will stop dehumidifying.
Empty the wa ter container and repla ce i t in the
correct posi tion. The appliance will continue
dehumidifying when
automa ticall y res tarts a fter approxi matel y three
mi nutes.
PERMANENT WATER DRAINAGE
It is possible to connect a drainage tube (not
supplied) to the uni t for permanent water
dra i nage.
If this option is desi red, you will need to
purchase a sui table tube from your local
ha rdwa re retailer. (Goldai r Select does not hol d
tubes as s pare parts).
Ensure tha t the end of the tube is lower than
the drain opening, otherwise the water will not
drain and floodi ng ma y occur. Also ensure the
wa ter tank is in posi tion (in the unit) otherwise
the continuous drainage will not operate.
Pla ce the end of the drainage tube in a draina ge
outlet. When you no l onger wish to use the
permanent wa ter drainage, disconnect the
dra i nage tube from the devi ce.

Operating your Appliance

the compressor
WARNING!
positioning your appliance, using
the timer will mean the unit will
come on automatically. Fire may
result if placed
combustible material.
1. Remove the
water tank
2. Remove the
rubber stopper
from the water
outlet port
3. Connect the
plastic tube
onto the water
outlet port
4. Replace the
water tank
Take care in
next to