Belkin WIC004 Setting Up

Magnetic wireless car charger

9/6/22, 11:01 AM

Setting up the Belkin WIC004

The Belkin BOOST↑CHARGE™ Magnetic Wireless Car Charger 10W, WIC004 allows you to mount your

iPhone® 13 and iPhone 12 series devices on the car vent mount and quickly charge your devices in the car

with up to 10W of power. This article will help you set up the Belkin WIC004.

Step 1:

Twist the cap clockwise to open.

Step 2:

Insert the clip unto the cap.

Step 3:

Twist the cap counterclockwise to lock the clip.

https://www.belkin.com/us/support-article?articleNum=318772

Belkin Official Support - Setting up the Belkin WIC004



1/4

Table of Contents

Need help?

Do you have a question about the WIC004 and is the answer not in the manual?

Page 1 The Belkin BOOST↑CHARGE™ Magnetic Wireless Car Charger 10W, WIC004 allows you to mount your iPhone® 13 and iPhone 12 series devices on the car vent mount and quickly charge your devices in the car with up to 10W of power. This article will help you set up the Belkin WIC004. Step 1: Twist the cap clockwise to open.
Page 2 WIC004btBK-NC does not. Step 5: Place the back of your phone onto the flat surface of the mount. The magnets on the Belkin WIC004 will align your phone perfectly and securely on the mount. QUICK TIP: You can set your phone on the mount in either portrait or landscape mode.
Page 3 9/6/22, 11:01 AM Belkin Official Support - Setting up the Belkin WIC004 Step 6: Securely clip the Belkin WIC004 into your car vent. NOTE: Do NOT clip the device on the car vent when your heater is ON. https://www.belkin.com/us/support-article?articleNum=318772...
Page 4 9/6/22, 11:01 AM Belkin Official Support - Setting up the Belkin WIC004 Step 7: Adjust the view angle of your phone. © 2022 Belkin International, Inc. https://www.belkin.com/us/support-article?articleNum=318772...