AEG SDS51200S1 User Manual page 33

8. Remove the correct part from the
hinge cover (E). Make sure to remove
the part DX, in the case of right
hinge, SX in opposite case.
9. Attach the covers (C, D) to the lugs
and the hinge holes.
C
D
E
B
10. Install the vent grille (B).
11. Attach the hinge covers (E) to the
hinge.
I
I
E
12. Connect the appliance laterally to
the kitchen furniture sidewall.
13. Disconnect the parts (Ha), (Hb), (Hc)
and (Hd).
Hb
Hd
14. Install the part (Ha) on the inner side
of the kitchen furniture.
ca. 50 mm
ca. 50 mm
15. Push the part (Hc) on the part (Ha).
Ha
Hc
16. Open the appliance door and the
kitchen furniture door at an angle of
90°.
17. Insert the small square (Hb) into
guide (Ha).
18. Put together the appliance door and
the furniture door and mark the
holes.
ENGLISH 33
Ha
Hc
90°
21 mm
90°
21 mm