Door Alignment - commercial cool CCRR32HB Manual

SET UP & USE
PROTECTION FROM HEAT AND MOISTURE
• Do not install your refrigerator in any location where heavy moisture is present
or if the location is not properly insulated. This refrigerator is not designed to
operate in temperature settings below 50° Fahrenheit.
• Location for the refrigerator should be on a hard surface and away from direct
sunlight and heat sources, e.g., radiators, baseboard heaters, cooking appliances,
etc..

DOOR ALIGNMENT

1. Remove any loose items in the refrigerator and carefully place
it on its back.
2. Use a Phillips head screwdriver to unscrew the 6 screws from
both side hinges.
3. Adjust the door so it is aligned and partially secure. Make sure
the door and cabinet are properly aligned and then secure
tightly.
4. Place the unit back in an upright position.
INSTALLING THE DOOR HANDLE
The base of the door handle is attached to the unit. Remove the pull handle that is
packed inside the refrigerator.
Insert the opening of the pull handle into the base and push it until it clicks into place.
Check to make sure it is secured. Do not remove once it is installed.
6 screws
Page 7