Door Reversal Instructions - commercial cool CCR77LBB Instruction Manual

SET UP & USE

DOOR REVERSAL INSTRUCTIONS

CAUTION:
To avoid personal injury to yourself and/or property, we recommend someone assist
you during the door reversal process.
Make sure appliance is disconnected from outlet.
1. Use a flat head screwdriver to remove
the top hinge cover.
2. Loosen and remove the 3 screws
holding the top hinge in place.
3. Remove the top hinge and carefully remove the door.
4. Remove the hole plugs from the opposite side and insert them in the screw holes
of the 3 removed screws.
5. The door stoppers for the left and right side of the door are different, so a door
stopper for the door reversal is included with the unit (located in the plastic bag).
Remove existing door stopper on the bottom of the top door by removing the
screw.
Install the door stopper that came with the unit on the opposite side with the screw.
NOTE: If the door opening will be reversed again in the future, keep the door stopper
in a safe place.
Page 12