Advertisement
3. Check your network settings to see which IP address has been assigned to the Data
Collector.
Tip: If you connect an external display via HDMI to the data collector, You will see the
assigned IP address to the Data Collector.
4. The Data collector was designed to work with Google Chrome. When you are ready, open
a Google Chrome Browser on any device that is connected to the network via LAN or
WLAN.
1. Type the IP address of the Data Collector in the Address bar on any device
connected to the same network via LAN or WLAN. It will show the main live view
set by factory settings. Settings depend on the time of order the settings were
requested and how many tables were requested to be displayed.
Note: Default Credentials Username:1 Password: 1
Advertisement
