Advertisement
Testing your System
1. Once you have your call buttons installed and your Data collector installed your next step
is to start testing.
2. To begin testing, press one time the call button that you wish to test. The call should
appear on the live view.
3. If you have any warning times the call will change to the other colors.
4. Normally you can clear the call by pressing and holding the call button for 3 seconds or by
clicking on the tile.
Note: If your call is not appearing on the display. Your call button may be out of range. Please
contact Pagertec for more information on how to increase the range of your system.
Understanding the Live Views
There are 2 views in the Live view screen. The Live view screen is the visual report of what is
happening on the floor.There are 2 types of Live view modes.
● Full Tag Mode
● Auto Tag Mode
1. Rank Mode: In this mode you can see the last 6 calls. Depending on the sorting the last 6
calls will be organized differently.
Advertisement
