Syntax S740MP Manual page 35

Power Management (Enabled)
Set this option to Enabled to enable the chipset power management and APM
(Advanced Power Management) features.
Suspend Time Out (Disabled)
This option defines the length of time that the system while in Standby mode,
it must be inactive before it enters Suspend mode.
Hard Disk Time Out (Disabled)
This option specifies the length of period of hard disk drive inactivity. When
this time period expires, the computer enters the power-conserving state
specified in the Hard Disk Power Down Mode option.
RTC Alarm Resume From Soft Off (Disabled)
This option enable or disable the RTC alarm to wake up the system from Soft
Off.
Resume On RTC Alarm / Date / Hour / Minute / Second
The system can be turned off with a software command. If you enable this
item, the system can automatically resume at a fixed time based on the
system's RTC (realtime clock). Use the items below this one to set the date
and time of the wake-up alarm. You must use an ATX power supply in order to
use this feature.
USB Device Lead To Power On (Disabled)
If you enable this item, the system can automatically resume if there is traffic
on the USB device.
Restore on AC/Power Loss (Power Off)
This sets the power state after a shutdown due to an unexpected interrupt of
AC power.
31