Advertisement
Removing the Unit from the Crate
Remove the unit from the crate.
Unfolding the Handle
1. Remove the plastic tie securing the upper arm to the
upper handle.
2. Rotate the handle to the operating position. Make
sure the transport latch pin is in the locked position
(see Figure 1).
1. Transport latch
pin-unlocked position
2. Push into lower arm
3. Slide the oval locking rings down each side of the
upper handle over the lower handle, locking the
handle sections together.
Check the Cable Adjustment
Follow the procedure in the Operator's manual to ensure
the self-propel drive cable has been adjusted properly.
Check the Tine Ground
Engagement Lever
Check the operation of the tine ground engagement
lever; see the Operator's manual for adjustment.
Servicing the Engine
The engine is shipped with oil; check oil level and if
necessary fill to the appropriate level. Exmark 4-Cycle
Figure 1
3. Rotate latch pin over
handle
4. Transport latch pin-locked
position
Premium Engine Oil is recommended; refer to the
Engine Owner's manual for an appropriate API rating
and viscosity.
Filling Out the Product
Registration
Fill out the online warranty registration form.
2
Advertisement
