Language Selection Menu-Language; Picture Setting Menu-Picture - JVC RX-DV31SLAC Instructions Manual

Choice Menu Operations
7 Language selection menu—LANGUAGE
LANGUAGE
MENU LANGUAGE ENGLISH
ENGLISH
AUDIO LANGUAGE
SUBTITLE OFF
ON SCREEN LANGUAGE ENGLISH
You can select "MENU LANGUAGE," "AUDIO LANGUAGE,"
and "SUBTITLE" only before playback.
¶ MENU LANGUAGE
Some discs have multiple languages.
Select one of the languages or language codes from AA
to ZU (see "Language code list" on page 54) as the menu
language.
¶ AUDIO LANGUAGE
Some discs have multiple audio languages.
Select one of the languages or language codes from AA
to ZU (see "Language code list" on page 54).
¶ SUBTITLE
Some discs have multiple subtitle languages.
Select one of the languages or language codes from AA
to ZU (see "Language code list" on page 54) or "OFF (no
subtitle)."
Note:
• When the language you have selected for MENU LANGUAGE,
AUDIO LANGUAGE, or SUBTITLE is not recorded on a disc, the
original language is used as the initial language automatically.
¶ ON SCREEN LANGUAGE
Select one of the languages shown on the TV.
7 Picture setting menu—PICTURE
PICTURE
MONITOR TYPE 4:3 LB
PICTURE SOURCE AUTO
SCREEN SAVER ON
MP3 / JPEG MP3
¶ MONITOR TYPE
You can select the monitor type to match your TV when
you play DVD VIDEO recorded in the picture's width/
height ratio of 16:9.
53
Select one of the following settings:
16:9 NORMAL (Wide television conversion)
Select when the aspect ratio of your TV is fixed to
16:9 (wide TV). The unit automatically adjusts the
screen width of the output signal correctly when
playing back a picture whose aspect ratio is 4:3.
16:9 AUTO (Wide television conversion)
Select when the aspect ratio of your TV is 16:9
(wide TV).
4:3 LB (Letter Box conversion)
Select when the aspect ratio of your TV is 4:3
(conventional TV). While viewing a wide screen
picture, the black bars appear on the top and the
bottom of the screen.
4:3 PS (Pan Scan conversion)
Select when the aspect ratio of your TV is 4:3
(conventional TV). While viewing a wide screen
picture, the black bars do not appear; however, the
left and right edges of the pictures will not be
shown on the screen.
Ex.: 16:9 Ex.: 4:3 LB
• Even if "4:3 PS" is selected, the screen size may
become "4:3 LB" with some DVD VIDEOs. This
depends on how the discs are recorded.
• When you select "16:9 NORMAL" for a picture whose
aspect ratio is 4:3, the picture slightly changes due to
the process for converting the picture width.
¶ PICTURE SOURCE
You can select the picture source according to the picture
type (film or video source). This takes effect only when
"PROGRESSIVE" is selected as the scanning mode (see
page 16).
Normally, set to "AUTO."
Select one of the following settings:
VIDEO (NORMAL)
Suitable for playing back a video source disc
with relatively a few movements.
VIDEO (ACTIVE)
Suitable for playing back a video source disc
with relatively a lot of movements.
FILM Suitable for playing back a film or progressive
source disc.
AUTO Used to play a disc containing both video and
film source materials. This unit recognizes the
picture type (film or video source) of the current
disc according to the disc information.
• If the playback picture is unclear or noisy, or the oblique
lines of the picture are rough, try changing to other
modes.
Ex: 4:3 PS