PowerXL SMART MICROWAVE AIR FRYER PLUS Owner's Manual page 25

Troubleshooting
Problem
The appliance does not work.
Food was not cooked
completely.
Food was not fried evenly.
White smoke is
coming from the appliance.
French fries were
not fried evenly.
Fries are not crispy.
Radio Interference
Operation of the microwave oven may cause interference to
your radio, television, or similar equipment. Interference can
be reduced or eliminated by taking the following measures:
1. Clean the door and sealing surface of the oven.
2. Reorient the receiving antenna of radio or television.
3. Relocate the appliance with respect to the receiver.
Possible Cause
The appliance is not plugged in.
The appliance has not been turned on by setting the preparation time
and temperature.
The appliance is plugged into an outlet that is shared with other devices.
The appliance is overloaded.
The temperature is set too low.
Some foods need to be turned during the cooking process.
Foods of different sizes are being cooked together.
If using multiple racks, trays need to be rotated.
Oil is being used.
Accessories have excess grease residue from previous cooking.
The wrong type of potato being used.
Potatoes were not blanched properly during preparation.
Too many fries are being cooked at once.
Raw fries have too much water.
Solution
Plug the power cord into an electrical outlet.
Set the temperature and time.
Plug the appliance into a dedicated electrical outlet.
Use smaller batches for more even cooking.
Raise temperature and continue cooking.
Check halfway through process and turn food if needed.
Cook similar-sized foods together.
Rotate trays from top to bottom and vice versa.
Wipe down to remove excess oil.
Clean the components and appliance interior
after each use.
Use fresh, firm potatoes.
Use cut sticks and pat dry to remove excess starch.
Cook less than 2 ½ cups of fries at a time.
Dry potato sticks properly before misting oil.
Cut sticks smaller. Add a bit more oil.
4. Move the appliance away from the receiver.
5. Plug the appliance into a different outlet so that
the appliance and the receiver are on different
branch circuits.
25