Evenflo exer saucer BABY ACTIVE Instructions For Future Use page 5

N
P
P
L
P
K
L
M
O
N
O
O
P
4. Press assembled seat ring
of the tray L
5. Locate three lower legs
tabs O on the lower legs with the slots in the base,
then snap the lower legs onto the base. Repeat for all
three lower legs.
Note: Make sure the tabs on the lower legs have
locked completely into the base, as shown, by moving
the legs from side-to-side. If they are not completely
locked in place, repeat this step until they are locked
securely.
6. Locate the tray
Place each spring dome onto the tray over each leg
opening, as shown. Press the spring dome downward
while turning until it locks into place.
If you don't line up the alignment guides properly, the spring
Q
dome may come off of the tray and cause injury.
Make sure the alignment guides
shown.
3 5
Assembling the ExerSaucer
K down firmly onto the top
until it snaps into place and spins freely.
M and the base
O
L and three spring domes
WARNING
Q line up properly, as
N . Align the
P .