Using Av Compu Link; Reference - JVC EX-A1EB Instructions Manual

Using AV COMPU LINK

When the TV set or device to be connected is a
JVC product equipped with the AV COMPU LINK-
II or -III jack, connecting them to the AV COMPU
LINK jack on the system will allow you to control
the other devices by operating one device.
Connection and setting
NOTE
• Refer to "Others" (
COMPU LINK mode.
• Also carefully read manuals of devices to be
connected.
Connection with a TV set
AV COMPU
LINK-II or -III
JVC
JVC-made
TV set
Connection cord
(sold separately)
TV input jack
Video 1
Video 3
• Connect to the Video 3 (DVD) input jack on your
TV set. If Video 3 is for DV/Movie input, read the
following descriptions:
Connection with a TV set and a VCR
AV COMPU
LINK-II or -III
JVC
JVC-made
TV set
Connection cord
(sold separately)
TV input jack AV COMPU LINK mode
Video 1
Video 2
• When using with initial settings, connect to Video
3 (if not set to DV/Movie input). Set the remote-
control code to "A".
36
A
page 30) to set the AV
Main unit
Setting of AV COMPU LINK mode
DVD 2
DVD 1
Main unit
Connection cord
(sold separately)
AV COMPU
LINK-II
JVC-made VCR
Remote-control code of VCR
DVD 2 B
A
DVD 3
Connection with a TV set and an AV
amplifier
• Also read manuals of the
AV COMPU
LINK-II or -III
AV amplifier.
JVC
JVC-made
TV set
Connection
cord (sold
separately)
AV amplifier
AV
COMPU LINK
Connection cord
(sold separately)
Input jack of AV amplifier
DVD
NOTE
For proper operation, be sure to connect the DIGITAL
OUT jack to the DVD sound input terminal on the AV
amplifier.
Operations
1
Turn on the main power of the
TV set.
2
Insert a disc or videotape into
the source device (the system
or a VCR).
3
Press the play button on the
source device.
• The TV set will be turned on.
• TV input will be switched to external input
(Video 1, 2 or 3) of the source device.
• The AV amplifier will be turned on.
• The source of the AV amplifier will be
switched to the device on which the play
button has been pressed.

Reference

Main unit
AV COMPU LINK mode
DVD 1