Port A Cool CYCLONE Quick Setup Sheet

QUICK SETUP SHEET
1
2
3
Initially, there
may be some
odor emitted from
the pads. This
disappates after
1-3 weeks of use.
The water flow valve on each unit is set at
max flow. Adjust as needed before use.
For more information, please see the owner's manual included with your Port-A-Cool® unit
Call (936) 568-5651 or visit www.port-a-cool.com/cycloneproducts.html
MIN
MAX
portable
evaporative
cooling units
IF USING INDOORS
• Place back of unit near a slightly opened
window or door.
• A window or door on the opposite side of
the room should be left slightly open.
CAUTION: Do not run pump
when water tank is dry.
FILL WITH WATER
• Connect with standard garden hose or
fill manually
• Once the tank is filled, the water hose can
be disconnected.
Scan the QR code
for more
information.
ADJUSTING WATER FLOW
FOR OPTIMAL COOLING
• Turn pump on so water is flowing over pads
• Turn fan on and run for 5 minutes
• Adjust water flow to achieve narrow dry streaks on pads
•Turn water valve to the right if no dry streaks are present
• Turn water valve to the left if large areas of dry pad
are present
• Allow 5 minutes between adjustments