Installation - Glacier bay SIMARD 15606 Use And Care Manual

Installation

1
Removing the shipping feet
□ Provide sufficient protection on the floor to protect the
vanity (A) from damage.
□ Tilt the vanity (A) backwards and remove the shipping feet
from the bottom of the vanity base using a pair of pliers
(not included).
2
Securing the vanity to the wall
□ Place the vanity (A) in the desired position taking into
account the location of your plumbing.
□ Ensure the vanity (A) is level front to back and at both
sides.
□ Secure the vanity (A) to the wall by inserting two #8 x 2 in.
screws (not included) through the back rail of the vanity.
CAUTION: It is recommended that the vanity be installed
to at least one wall stud. If you are unable to locate wall
studs, it is recommended that you use wall anchors (not
included) to secure the vanity.
5
Please contact 1-855-HD-GLACIER for further assistance.
HOMEDEPOT.COM/GLACIERBAY