Advertisement
Untie the twist tie from handlebar
post, do not allow the wire to fall
inside the handlebar post.
Place flat washers to table mount
bolts, place table mount bolts with
washers, finger tighten, then secure
10
bolts with washers with hex key.
0
Connect the wire from the handlebar
post to the wire at the bottom of the
tablet mount.
Slide water bottle holder onto post,
secure both sides with screws and
hex key.
After connecting wires, feed excess
wire into handlebar post and slide
tablet mount into handlebar post.
Remove nut from the right pedal by
turning counterclockwise.
Advertisement
